AITIS

AITIS TRAINING PROGRAM

Abdallah. I. AlTamimi Industrial Services Est. (AITIS) Policy is to guarantee a high quality of training and success to our candidates in continual education. In today's changing world, we change accordingly adopting to new system of training methodology while maintaining our reputation of reliability and systematic approach in present competitive world.

AITIS launched unique courses / seminars to impart knowledge of "Manufacturing, International standards and codes, Welding Technology and NDT" by using renowned and proven methodology. AITIS has faculty with hands on experience in training program to deliver quality and effective skills training.

The Vision of the AITIS is to provide services to the Engineers, Industries & the Society with high quality of training, certification & consultancy in quality systems.

Training and Courses offered

1. Certification Courses

2. Training Courses

3. Seminars (1 – 3 days)

Candidates shall be awarded with the certificate after successful completion of training, assignment and examination as per applicable international standards and / or AITIS standard operating procedure as appropriate.


Certificate of attendance will be awarded to the candidate after successful completion of training courses / seminars.


API 570 PIPING INSPECTOR COURSE

API 570, Piping Inspection Code, Fourth Edition, is an inspection code developed and published by the American Petroleum Institute (API) that covers the in-service inspection, repair, alteration, and rerating activities for piping systems and their associated pressure relieving devices in the petroleum and chemical process industries. It applies to metallic piping and those plastic ones that are either fiberglass reinforced (FRP) or glass reinforced (GRP).

API 570 establishes requirements and guidelines for maintaining the safety and mechanical integrity of piping systems after they have been placed into service/commissioned. While it was primarily intended for those systems in the petroleum and chemical process industries, this code can be applied to any piping system where practical.


OBJECTIVE Inspection methodologies, remaining life calculations, degradation mechanisms, repair & re-rating of in-service piping system and relations to ASME codes

PRE-REQUISITES
EDUCATION MIN. YRS OF EXPERIENCE DESCRIPTION OF EXPERIENCE
BS or higher in engineering or technology 01 year Supervision or performance of inspection activities as described in API 570
2 year degree or certificate in engineering or technology 02 year Design, construction, repair, operation or inspection of in-service piping systems, of which one year must be in supervision or performance of inspection activities as described in API 570
High school diploma or equivalent 03 year Design, construction, repair, operation or inspection of in-service piping systems, of which one year must be in supervision or performance of inspection activities as described in API 570
None 5 or more years Design, construction, repair, operation or inspection of in-service piping systems, of which one year must be in supervision or performance of inspection activities as described in API 570

WHO SHOULD ATTEND This Course will specially benefit Technician, Supervisors, Engineers and Managers from the following disciplines:

-Mechanical Engineering

-Inspection

-Maintenance & Operations

-Technical & Engineering

-QA / QC


COURSE CONTENT API 570 Piping Inspection Code
Modules:
1. Inspection
2. Repair
3. Alteration & Rerating of In-Service Piping System

DURATION 5 Days



NDT I

(AITIS-01-VT)(AITIS-01-PT)(AITIS-01-MT)

(AITIS-01-UT)(AITIS-01-RT)(AITIS-01-ET)

OBJECTIVE On completion of the training participant will be able to calibrate the instrument, perform the inspection using ndt method under the supervision of level II
PRE-REQUISITES High school graduate with entrance quiz test to assess ability to understand english and basic mathematics required for studying the subject. Inspectors, Maintenance Personnel, Engineers.
WHO SHOULD ATTEND High school graduates who want to take up inspection as their career.
DURATION 5 Days For Each Method


NDT II

(AITIS-02-VT)(AITIS-02-PT)(AITIS-02-MT)

(AITIS-02-UT)(AITIS-02RT)(AITIS-02-ET)

OBJECTIVE On completion of the training participant will be able to calibrate the instrument, perform the inspection using ndt method independently and prepare reports.
PRE-REQUISITES High school graduate with entrance quiz test to assess ability to understand english and basic mathematics required for studying the subject. Qualified as a level I.
WHO SHOULD ATTEND Inspectors, maintenance personnel, engineers. High school graduates who want to take up inspection as their career.
DURATION 5 Days Each


NDT III- REFRESHER

(AITIS-03-B)(AITIS-03-VT)(AITIS-03-PT)(AITIS-03-MT)

(AITIS-03-UT)(AITIS-03RT)(AITIS-03-ET)

OBJECTIVE On Completion Of The Training Participant Will Be Able To Apply In Depth Knowledge Of Ndt In Preparation Of Ndt Procedures, Application Of International Standards & Codes, Have Better Understanding Of Concepts Of Each Method Which Will Help Him To Succeed In Asnt Ndt Level Iii Examination
PRE-REQUISITES Engineers With 1 Year Experience In Ndt, Science Graduate With 2 Years Experience In Ndt, High School Graduate Having Level Ii With 5 Years Experience In Ndt
WHO SHOULD ATTEND NDT inspectors and supervisors, inspection engineers, welding inspectors.
DURATION 5 Days Each


WELDING (AITIS-W)

OBJECTIVE On completion of the training participant will be acquainted with the welding machines used for gtaw, fundamentals of the welding theory, weld symbols, procedures, welding equipment, weld discontinuities, ndt methods for weld inspection.
PRE-REQUISITES Welders Either Fresh Or Experienced In Welding With Capability To Understand Instructions In English. Personnel In Inspection Or NDT Field Having Technical Experience. Engineers With 1 Year Experience In NDT And Inspection And Want To Take Up Welding As A Profession.
WHO SHOULD ATTEND Inspectors, Maintenance Personnel, Engineers. Welders Having One Year Of Field Experience In Welding.
DURATION 5 Days


الحماية من الاشعاع

RADIATION SAFETY (AITIS-01-RSAعربي) (AITIS-01-RSE)

OBJECTIVE On completion of the training participant will be able to manipulate algebraic formulas in determining radiation doses, will be familiar with the health protection problems associated with radiation exposure and the provisions of applicable regulations for the protection of personnel.
PRE-REQUISITES Level I and level ii inspectors in NDT profession, engineers and other personnel with technical experience.
WHO SHOULD ATTEND Technicians and inspectors working in inspection field.
DURATION 5 Days


INTERNATIONAL STANDARDS & CODES (AITIS-ISC)

OBJECTIVE On completion of the training participant will understand the requirementsof standards and codes and will be familiar with different international standards and codes used in the oil and gas industry and how to apply them.
PRE-REQUISITES Level II: With 3 Years Of Experience And Ability To Read And Write English Clearly. A science or engineering graduate working in qa / qc department or inspection field.
WHO SHOULD ATTEND Level II: With 3 Years Of Experience And Ability To Read And Write English Clearly. A science or engineering graduate working in QA / QC department or inspection field.
DURATION 5 Days


BASIC METALLURGY (AITIS-BM)

OBJECTIVE On completion of the training participant will be able to distinguish the types of steels used in the industry, will be familiar with the manufacturing process of steel and other heat treatment processes and how chemical composition can be used to improve the properties of steel.
PRE-REQUISITES Level II NDT inspectors, engineers in the field of inspection in oil and gas industry, persons working in production and having technical experience with ability to understand english required for studying the subject.
WHO SHOULD ATTEND Supervisors, Inspectors, Maintenance Personnel, Material Suppliers, Fabricators And Engineers Working In Manufacturing Activities
DURATION 5 Days


MANUFACTURING PROCESSES & PRODUCT TECHNOLOGY (AITIS-MPPT)

OBJECTIVE On completion of the training participant will be able to anlyze the use of different types of materials for manufacturing products, will be able to select suitable manufacturing process for a product and identify discontinuities associated with manufacturing processes.
PRE-REQUISITES LEVEL II NDT Inspectors, Engineers In The Field Of Inspection In Oil , Gas And Chemical industry, Persons Working In Production And Having Technical Experience With Ability To Understand English Required For Studying The Subject.
WHO SHOULD ATTEND Supervisors, Inspectors, Maintenance Personnel, Material Suppliers, Fabricators And Engineers Working In Manufacturing Activities
DURATION 5 Days


HAZARDS AND SAFETY AT WORKSITE (AITIS-HASAW)

DESCRIPTION

POTENTIAL OF ACCIDENTS

OCCUPATIONAL HEALTH HAZARDS

IDENTIFY TYPES OF HAZARDS

ASSESS HAZARDS AND RISKS ASSOCIATED AT WORKSITES

MINIMIZE / ELIMINATE RISKS

REGULATIONS / LEGISLATIONS

ORGANIZING WORKPLACE

USE OF PERSONAL PROTECTION EQUIPMENT

RECORDING AND REPORTING

OBJECTIVE On completion of the training participant will be able to identify hazards at worksite and what are the risks and how to eliminate / minimize them, will be able to use different types personal protection equipment at worksite.
PRE-REQUISITES LEVEL I AND LEVEL II Inspectors In NDT Profession, Technicians / Inspectors Working In Oil, Gas And Chemical Industry, Engineers And Personnel With Technical Experience Having Ability To Understand English And Basic Mathematics Required For Studying The Subject.
DURATION 5 Days